AddRotatedTextBoxToDocumentPageNum

Structure

AddRotatedTextToDocumentPageNum(sDocFile, sText: String; iTop, iLeft, iWidth, iHeight, iAngle, iTransparency, iOptions, iBorder, iRadius, iDrawOptions, iTextAlign, iTextSize, iRed, iGreen, iBlue: Integer; bFirstPageOnly: Boolean): Char

Parameters

| Parameter | Type | Description
| sDocFile | String | the original file to be updatedsText | String | the text to be addediPageNum | Integer | Page number where text should be addediTop | Integer | position of the text - topiLeft | Integer | position of the text - leftiWidth | Integer | Width of the text.iHeight | Integer | Height of the text.iAngle | Integer | The angle the box should be rotated around the top-left corner, measured

anti-clockwise in degreesiTransparency | Integer | Transparency - percentage between 0 and 100iOptions | Integer | 0 = Center vertical alignment

1 = Top vertical alignment

2 = Bottom vertical alignment

3 = Center vertical alignment, no wrapping

4 = Top vertical alignment, no wrapping

5 = Bottom vertical alignment, no wrappingiBorder | Integer | 0 = No Border

1 = Border

2 = Border with rounded cornersiRadius | Integer | Radius of the corner arcsiDrawOptions | Integer | 0 = Outline

1 = Fill

2 = Fill and outlineiTextAlign | Integer | 0 = Left aligned (default)

1 = Center aligned

2 = Right aligned

3 = Justified

4 = Force justified

5 = Last line justified

Anything else = Left alignediTextSize | Integer | The text size in pointsiRed | Integer | The red component of the color. The values of the color parameters range from 0 to

1, with 0 indicating 0% and 1 indicating 100% of the color.iGreen | Integer | The green component of the color. The values of the color parameters range from 0 to

1, with 0 indicating 0% and 1 indicating 100% of the color.iBlue | Integer | The blue component of the color. The values of the color parameters range from 0 to

1, with 0 indicating 0% and 1 indicating 100% of the color. |

Return Value

Char

'1' = Success, '0' = Failure. Success means the newly updated file exists.

Description

Use this function to automatically add rotated text to a specific page in a pdf file previously created. Note: position parameters are in units that are exactly 1/72 inches per unit, which is approximately the same as a "point", a unit used in the printing industry. 25.4 millimetres is one inch.

Example

sText = " APPROVED "

if AddRotatedTextBoxToDocumentPageNum(GetCurrentSignOffDoc, sText, 1, 600, 300, 135, 50,

20, 0, 0, 2, 20, 2, 0, 20,

100, 0, 0) = "0" then

ShowMessage("Document was NOT modified")

|