Connecting to Supported Hardware

The first time a user successfully logs into the mobile application (or after a manual uninstall and reinstall), IndyGo will ask the user to identify any supported external hardware used with the application. Select the desired device or press "Skip this step" if not using any listed devices. Connecting devices directly is as simple as pressing "Continue" and "Finish." BLE devices, like the Chainway R6, will require you to turn on the device and pair it with the identifier on the RFID/Barcode sled. Bluetooth Devices like the Zebra 8500 and CS4070 will require the user to connect via Bluetooth and then return to the application to finish the pairing process.

After successful pairing, if the device uses UHF RFID, the user will be asked if they would like to enable *RFID capabilities.*Answering "Yes" will put you directly into the application with the ability to begin scanning/pairing RFID devices.

If you need to pair with a different device or reconnect to your current device, you can always Manage Device Connection from your "Settings" Screen. You can refresh your connection, pair it with a new device, or forget your current device from that option.

The list of supported devices per operating system can be found